Cristian Solé Cutrona

 Descarregar Pdf

Dades personals-contacte / Datos personales-contacto / Personal information-contact

sole

Nom/Nombre/Name:

 Cristian Solé Cutrona

Categoria/Categoría/Category:

Agregat / Agregado / Associate Professor

Àrea/Área/Area:

Enginyeria Mecànica / Ingeniería Mecánica / Mechanical Engineering

Departament/Departamento/Department:

Enginyeria Industrial i de l'Edificació / Ingeniería Industrial y de la Edificación / Industrial and Building Engineering

 Centre/Centro/Center:

 Escola Politècnica Superior / Escuela Politécnica Superior/ Polytechnic School

Despaxt/Despacho/Office:

 Campus de Cappont. Edifici CREA. Despatx 0.04 / Campus de Cappont. Edificio CREA. Despacho 0.04Campus of Cappont. CREA Building. Office 0.04

cristian.sole@udl.cat

+34 973 00 35 86

Code ORCID:

 https://orcid.org/0000-0003-3680-576X

 

  TORNAR AL LLISTAT / VOLVER AL LISTADO / BACK TO LIST

Formació acadèmica / Formación académica / Academic training

catLOGO
  • Doctor per la Universitat de Lleida (UdL). 2009
  • Enginyer Industrial per la Escola Tècnica i Superior d’Enginyeria Industrial de Terrassa de la Universitat Politècnica de Catalunya (UPC). 2004
  • Enginyer Tècnic Industrial, especialitat mecànica per la Escola Politècnica Superior de la Universitat de Lleida (UdL). 2001
EspLOGO
  • Doctor por la Universitat de Lleida (UdL). 2009
  • Ingeniero Industrial por la Escola Tècnica i Superior d’Enginyeria Industrial de Terrassa de la Universitat Politècnica de Catalunya (UPC). 2004
  • Ingeniero Técnico Industrial, especialidad mecánica por la Escola Politècnica Superior de la Universitat de Lleida (UdL). 2001
EngLOGO
  • PhD by the University of Lleida (UdL). 2009
  • Industrial Engineer by the Technical and Superior School on Industrial Engineering of Terrassa from Polytechnic University of Catalonia (UPC). 2004
  • Mechanical Engineer by the Polytechnic School from University of Lleida (UdL). 2001. 

 

  TORNAR AL LLISTAT / VOLVER AL LISTADO / BACK TO LIST

Experiència professional / Experiencia profesional / Professional experience

catLOGO
  • Professor Agregat. Universitat de Lleida. 15-6-2012 fins actualitat.
  • Professor Col·laborador. Universitat de Lleida. 15-2-2007 fins 14-6-2012.
  • Becari en projectes de recerca. Universitat de Lleida. 2004-2007.
EspLOGO
  • Profesor Agregado. Universitat de Lleida. 15-6-2012 hasta la fecha.
  • Profesor Colaborador. Universitat de Lleida. 15-2-2007 hasta 14-6-2012.
  • Becario en proyectos de investigación. Universitat de Lleida. 2004-2007.
EngLOGO
  • Associate Professor. University of Lleida. 15-6-2012 to date.
  • University of Lleida. 15-2-2007 hasta 14-6-2012.
  • PhD students in research contracts. University of Lleida. 2004-2007.

 

  TORNAR AL LLISTAT / VOLVER AL LISTADO / BACK TO LIST

Docència / Docencia / Teaching

catLOGO
  • Grau en Arquitectura Tècnica i Edificació
  • Grau en Enginyeria Mecànica
  • Grau en Enginyeria Electrònica Industrial i Automàtica
  • Grau en Enginyeria de l’Energia i Sostenibilitat
  • Màster en Enginyeria Industrial
EspLOGO
  • Grado en Arquitectura Técnica y Edificación
  • Grado en Ingeniería Mecánica
  • Grado en Ingeniería Electrónica Industrial y Automática
  • Grado en Ingeniería de la Energía y Sostenibilidad
  • Máster en Ingeniería Industrial
EngLOGO
  • Degree in Architectural Technology and Building Construction
  • Degree in Mechanical Engineering
  • Degree in Automation and Industrial Electronic Engineering
  • Degree in Energy and Sustainability Engineering
  • Master 's Degree in Industrial Engineering

 

  TORNAR AL LLISTAT / VOLVER AL LISTADO / BACK TO LIST

Gestió / Gestión / Management

catLOGO
  • Sots-director de Relacions Internacionals (20-6-2011 fins actualitat)
  • Adjunt al Vicerectorat de Relacions Internacionals (1-11-2015 fins 30-9-2016)
  • Coordinador del Màster en Enginyeria Industrial (1-3-2010 fins 3-6-2011)
EspLOGO
  • Subdirector de Relaciones Internacionales (20-6-2011 hasta la fecha)
  • Adjunto al Vicerrectorado de Relaciones Internacionales (1-11-2015 hasta 30-9-2016)
  • Coordinador del Máster en Ingeniería Industrial (1-3-2010 hasta 3-6-2011)
EngLOGO
  • Deputy-director for International Relationships (20-6-2011 to date)
  • Assistant to the International Relationships Vice rectorate (1-11-2015 to 30-9-2016)
  • Coordinator of the Master in Industrial Engineering. (1-3-2010 to 3-6-2011)

 

  TORNAR AL LLISTAT / VOLVER AL LISTADO / BACK TO LIST

Recerca / Investigación / Research

Ambit de recerca

catLOGO
  • Eficiència energética en edificis i indústria
  • Energies renovables
  • Refrigeració radiant
  • Emmagatzematge d’energia tèrmica
EspLOGO
  • Eficiencia energética en edificios y industria
  • Energías renovables
  • Refrigeración radiante
  • Almacenamiento de energía térmica
EngLOGO
  • Energy efficiency in buildings and industry
  • Renewable energy
  • Radiant cooling
  • Thermal energy storage

Activitats de recerca / Actividades de investigación / Research activities

catLOGO
  • Trams de recerca: 2 (2015).
  • Tesis doctorals dirigides: 1 codirigida
  • Publicacions totals: 33
  • Total de cites: 1287
  • h-index: 17

 

Participació en projectes europeus darrers 5 anys:

INNOSTORAGE - Use of innovative thermal energy storage for marked energy savings and significantlowering of CO2 emissions (PIRSES-GA-2013-610692), 2013-2017. 89.300,00 €. Comissió Europea. Investigador.

MERITS: More effective use of Renewables Including compact seasonal Thermal energy Storage(FP7-ENERGY-2011-295983), 2012-2016. 351.095,00 €.Comissió Europea. Investigador

HESTOR: Development of thermal storage application for HVAC solutions based on phase change materials(FP7-CAPACITIES-262285), 2010-2012. 217.920,00 €. Investigador

 

Participació en altres projectes de recerca darrers 5 anys:

Desarrollo y evaluación de un sistema de refrigeración radiante y captación solar (RTI2018-097669-A-I00),2019-2021. Projecte Retos del Ministerio de Ciéncia, Innovación y Universidades. 90.750,00 € (investigador).

Desarrollo y evaluación de un equipo para producción combinada de frío y calor mediante refrigeraciónradiante y captación solar (2018-19). Fundación Iberdrola. 18.984,00 € (investigador).

Mejora de la eficiencia energética en edificios mediante el almacenamiento de energía tèrmica(ENE2011-28269-C03-01), 2012-14. Projecte de Plan Nacional del Ministerio de Economía y Competitividad. 193.600,00 € (investigador).

El almacenamiento de energía térmica como herramienta de mejora de la eficiencia energética en la industria (TES in industry) (ENE2011-22722), 2012-14. Projecte de Plan Nacional del Ministerio de Economía y Competitividad. 231.110,00 € (investigador).

 

Publicacions (les 5 darreres/més importants):

  • Coma J, Pérez G, Solé C, Castell A, Cabeza LF. (2016). Thermal assessment of extensive green roofs as passive tool for energy savings in buildings. Renewable Energy 85, 1106-1115.
  • Castell, A., Solé, C. (2015). An overview on design methodologies for liquid-solid PCM storage systems. Renewable and Sustainable Energy Reviews, 52, pp. 289-307
  • P Moreno; C Solé; A Castell; LF Cabeza (2014). The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review, Renewable and Sustainable Energy Reviews 39, 1-13
  • P Moreno; A Castell; C Solé; G Zsembinszki; LF Cabeza (2014). PCM thermal energy storage tanks in heat pump system for space cooling, Energy and Buildings 82, 399-405.
  • Pérez, G., Vila, A., Rincón, L., Solé, C., Cabeza, L.F (2012). Use of rubber crumbs as drainage layer in green roofs as potential energy improvement material. Applied Energy, 97, pp. 347-354
  • Tramos de investigación: 2 (2015).
  • Tesis doctorales dirigidas: 1 codirigida
  • Publicaciones totales: 33
  • Total de citas: 1287
  • h-índex: 17

 

Participación en proyectos europeos últimos 5 años:

INNOSTORAGE - Use of innovative thermal energy storage for marked energy savings and significantlowering of CO2 emissions (PIRSES-GA-2013-610692), 2013-2017. 89.300,00 €. Comissió Europea. Investigador.

MERITS: More effective use of Renewables Including compact seasonal Thermal energy Storage(FP7-ENERGY-2011-295983), 2012-2016. 351.095,00 €.Comissió Europea. Investigador

HESTOR: Development of thermal storage application for HVAC solutions based on phase change materials(FP7-CAPACITIES-262285), 2010-2012. 217.920,00 €. Investigador

 

Participación en otros proyectos de investigación últimos 5 años:

Desarrollo y evaluación de un sistema de refrigeración radiante y captación solar (RTI2018-097669-A-I00),2019-2021. Projecte Retos del Ministerio de Ciéncia, Innovación y Universidades. 90.750,00 € (investigador).

Desarrollo y evaluación de un equipo para producción combinada de frío y calor mediante refrigeraciónradiante y captación solar (2018-19). Fundación Iberdrola. 18.984,00 € (investigador).

Mejora de la eficiencia energética en edificios mediante el almacenamiento de energía tèrmica(ENE2011-28269-C03-01), 2012-14. Projecte de Plan Nacional del Ministerio de Economía y Competitividad. 193.600,00 € (investigador).

El almacenamiento de energía térmica como herramienta de mejora de la eficiencia energética en la industria (TES in industry) (ENE2011-22722), 2012-14. Projecte de Plan Nacional del Ministerio de Economía y Competitividad. 231.110,00 € (investigador).

 

Publicaciones (las 5 últimas/más importantes):

  • Coma J, Pérez G, Solé C, Castell A, Cabeza LF. (2016). Thermal assessment of extensive green roofs as passive tool for energy savings in buildings. Renewable Energy 85, 1106-1115.
  • Castell, A., Solé, C. (2015). An overview on design methodologies for liquid-solid PCM storage systems. Renewable and Sustainable Energy Reviews, 52, pp. 289-307
  • P Moreno; C Solé; A Castell; LF Cabeza (2014). The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review, Renewable and Sustainable Energy Reviews 39, 1-13,
  • P Moreno; A Castell; C Solé; G Zsembinszki; LF Cabeza (2014). PCM thermal energy storage tanks in heat pump system for space cooling, Energy and Buildings 82, 399-405.
  • Pérez, G., Vila, A., Rincón, L., Solé, C., Cabeza, L.F (2012). Use of rubber crumbs as drainage layer in green roofs as potential energy improvement material. Applied Energy, 97, pp. 347-354
EngLOGO
  • Research periods (sexenios): 2 (2015).
  • Supervised PhD Thesis: 1 co-supervised
  • Total publications: 33
  • Total citations: 1287
  • h-índex: 17

 

Participation in European projects in the last 5 years:

INNOSTORAGE - Use of innovative thermal energy storage for marked energy savings and significantlowering of CO2 emissions (PIRSES-GA-2013-610692), 2013-2017. 89.300,00 €. Comissió Europea. Investigador.

MERITS: More effective use of Renewables Including compact seasonal Thermal energy Storage(FP7-ENERGY-2011-295983), 2012-2016. 351.095,00 €.Comissió Europea. Investigador

HESTOR: Development of thermal storage application for HVAC solutions based on phase change materials(FP7-CAPACITIES-262285), 2010-2012. 217.920,00 €. Investigador

 

Participation in other research projects in the last 5 years:

Desarrollo y evaluación de un sistema de refrigeración radiante y captación solar (RTI2018-097669-A-I00),2019-2021. Projecte Retos del Ministerio de Ciéncia, Innovación y Universidades. 90.750,00 € (investigador).

Desarrollo y evaluación de un equipo para producción combinada de frío y calor mediante refrigeraciónradiante y captación solar (2018-19). Fundación Iberdrola. 18.984,00 € (investigador).

Mejora de la eficiencia energética en edificios mediante el almacenamiento de energía tèrmica(ENE2011-28269-C03-01), 2012-14. Projecte de Plan Nacional del Ministerio de Economía y Competitividad. 193.600,00 € (investigador).

El almacenamiento de energía térmica como herramienta de mejora de la eficiencia energética en la industria (TES in industry) (ENE2011-22722), 2012-14. Projecte de Plan Nacional del Ministerio de Economía y Competitividad. 231.110,00 € (investigador).

 

Publications (last 5/more important):

  • Coma J, Pérez G, Solé C, Castell A, Cabeza LF. (2016). Thermal assessment of extensive green roofs as passive tool for energy savings in buildings. Renewable Energy 85, 1106-1115.
  • Castell, A., Solé, C. (2015). An overview on design methodologies for liquid-solid PCM storage systems. Renewable and Sustainable Energy Reviews, 52, pp. 289-307
  • P Moreno; C Solé; A Castell; LF Cabeza (2014). The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review, Renewable and Sustainable Energy Reviews 39, 1-13,
  • P Moreno; A Castell; C Solé; G Zsembinszki; LF Cabeza (2014). PCM thermal energy storage tanks in heat pump system for space cooling, Energy and Buildings 82, 399-405.
  • Pérez, G., Vila, A., Rincón, L., Solé, C., Cabeza, L.F (2012). Use of rubber crumbs as drainage layer in green roofs as potential energy improvement material. Applied Energy, 97, pp. 347-354

 

  TORNAR AL LLISTAT / VOLVER AL LISTADO / BACK TO LIST

   Darrera modificació: